🔧 2PCS Quick Release Hood Pins 🚗 Low-Profile Rotatable Metal Fastener Kit

🔧 2PCS Quick Release Hood Pins 🚗 Low-Profile Rotatable Metal Fastener Kit

user user user user user
100+ orders in the last 24h
9999+ Happy Customers
$17.99
$17.99
SAVE Sold out

🐾BUY MORE SAVE MORE🐾

 
add_shopping_cart

-

Ordered

local_shipping

- - -

Order Ready

redeem

- - -

Delivered

🔧 2PCS Quick Release Hood Pins 🚗 Low-Profile Rotatable Metal Fastener Kit

🔧 2PCS Quick Release Hood Pins 🚗 Low-Profile Rotatable Metal Fastener Kit

$17.99
$17.99
SAVE Sold out
Automotive Quick-Release Hardware

🔧 Low-Profile Quick Release Hood Pins

A compact metal fastening solution designed for custom automotive body panels, hoods, trunks and related fabrication projects. Press to lock, press again to release.
🔩 Metal Construction
↻ Rotatable Design
👇 Press-to-Release
🚗 Custom Car Projects
Flexible Alignment

Rotatable Design for Better Positioning

The adjustable structure allows the fastener to rotate and align with the body-panel gap, helping create a secure fit even when custom panel positioning requires more flexibility.

👇
Press-to-Lock

Push the center button into position for quick fastening.

↻
Adjustable Angle

Rotatable construction helps with panel alignment.

↔️
Gap Alignment

Helps adapt to custom panel positioning.

🛡️
Secure Holding

Designed to help keep panels firmly positioned.

Check Before Installation

Compact Low-Profile Dimensions

The supplied product image shows a 1.18 in top diameter, approximately 2.36 in overall height and detailed threaded dimensions. Always confirm measurements against your vehicle and panel setup before purchase.

Top Diameter 1.18 in
Overall Height 2.36 in
Threaded Section Length 2.08 in
Body Height 0.59 in
Important: Measure your installation location before ordering. Vehicle body thickness, panel construction and custom fabrication requirements can vary substantially.
Built for Custom Automotive Projects

2-Piece Fastener Set

The set is intended for custom automotive panel applications such as hoods, trunks, bumpers and other body-panel projects where a low-profile removable fastener is useful.

⬇️
Low Profile

Designed to sit close to the panel surface.

↻
Rotatable

Allows more flexible alignment during installation.

✨
Metal Finish

Clean brushed-metal automotive appearance.

🔧
Installation Hardware

Includes the mounting pieces shown in the package image.

Clean Automotive Finish

Quick-Release Hood Pin Design

A flush-style button top gives the installation a cleaner appearance than a traditional exposed pin, while the quick-release mechanism is designed for convenient access to removable body panels.

⭕
Flush Button

Low-profile circular appearance after installation.

🛡️
Metal Construction

Built from metal components as shown in the supplied imagery.

↻
Adjustable

Rotatable configuration supports custom alignment.

🚘
Automotive Use

Suitable for properly planned custom body-panel installations.

Detailed Construction

Premium Metal Build

The supplied imagery highlights a brushed metal finish, machined threads, smooth button action and substantial mounting hardware for custom fabrication work.

✨
Brushed Finish

Clean metallic surface suited to custom car builds.

👇
Smooth Button Action

Designed around a press-operated locking mechanism.

🔩
Precision Threads

Threaded hardware supports secure adjustment and mounting.

🔧
Stable Hardware

Nuts and washers support a firm mechanical installation.

Package Contents

What's Included

The product imagery shows a two-fastener kit with button tops, bases, threaded rods, washers and nuts.

2× Button Tops
2× Bases
2× Threaded Rods
2× Washers
2× Nuts
Installation Overview

Designed for Custom Installation

Installation requires drilling and mechanical fastening to the vehicle panel. Professional installation is strongly recommended, especially when working with painted body panels or structural components.

1️⃣
Drill Mounting Hole

Mark and prepare the correct mounting location.

2️⃣
Install Hardware

Secure the base using the included mounting components.

3️⃣
Fit Button Top

Install and align the top fastener with the panel.

✅
Check Alignment

Verify locking, clearance and panel fit before driving.

Installation Notice: Drilling vehicle panels can permanently alter the vehicle and may affect paint, corrosion protection or panel integrity. Proper tools, measurements and professional fitting are recommended.
Customer Feedback

What Builders Are Saying

Replace the placeholders below with genuine customer photos and verified buyer feedback.

CUSTOMER NAME
✓ Verified Customer
★★★★★

Replace this with a genuine buyer review about installation, panel alignment, appearance or quick-release operation.

CUSTOMER NAME
✓ Verified Customer
★★★★★

Add an authentic testimonial here describing the customer's custom hood, trunk or automotive body-panel project.

CUSTOMER NAME
✓ Verified Customer
★★★★★

Replace this placeholder with another genuine review about the metal finish, fitment or overall installation experience.

Use only real customer names, photos and testimonials that you have permission to publish.
Questions & Answers

Frequently Asked Questions

What is included in the set?
The supplied imagery shows two button tops, two bases, two threaded rods, two washers and two nuts.
What is the top diameter?
The product-size image lists the upper diameter at approximately 1.18 inches.
What is the overall height?
The supplied product image lists the overall fastener height at approximately 2.36 inches.
Is the fastener adjustable?
Yes. The supplied imagery shows a rotatable design intended to help align the fastener with the body-panel gap.
How does the quick-release mechanism work?
The design uses a press-operated top. The images describe it as press-to-lock and press-to-release.
Can it be used on a hood?
The supplied imagery shows the product being used for automotive hood, trunk, bumper and body-panel applications. Proper fitment and professional installation are still required.
Is drilling required?
Yes. The installation image shows drilling a mounting hole in the panel. This is a permanent modification, so careful measuring and professional installation are recommended.
Will it fit every vehicle?
Vehicle construction and panel thickness vary. Do not assume direct universal fit without measuring your application and confirming sufficient clearance and mounting space.
What material is it made from?
The supplied imagery describes it as a metal / aluminum-style fastener with a brushed finish. Confirm the exact alloy specification with your supplier if you need to publish a precise material grade.
Can I install it myself?
Experienced automotive DIY users may be able to complete installation, but because drilling and panel alignment are required, professional installation is strongly recommended.
🏁

Upgrade Your Custom Build

Give your hood or custom body-panel project a cleaner low-profile fastening solution with adjustable alignment, metal construction and convenient quick-release operation.

GET YOUR 2PC FASTENER KIT →
2-Piece Kit • Rotatable • Press-to-Release • Metal Construction
View full details